Maintenance Strategy
Get an overview of your objects' maintenance strategies
Introduction
View, calculate, and compare maintenance strategies for objects.
- Audience
- Maintenance Manager
View and Calculate Maintenance Strategies
Get an overview of your objects' maintenance strategies based on your current setup, and compare them from the total number of corrective and preventive work orders of an object.
Calculate Maintenance Strategy
To ensure that a maintenance strategy is calculated correctly, 'Use functional location hierarchy' must be disabled.
Go to Enterprise asset management > Inqueries > Objects > Maintenance strategy to calculate maintenance strategies. Calculations of maintenance strategies are done based on your current setup.
- On the maintenance strategy overview, click 'Calculate' in the upper left corner.
- A dialog opens where you can make a description for your calculation.
- Click OK to finish and calculate.
- You can now view the calculations in the overview. An example is shown in the screenshot below.
View and Compare Maintenance Strategies
From the grid in the overview, you can compare objects' strategies to each other and see if they have one of the following four available strategies:
- Run to failure
- This strategy is set if setup has not been made for preventive, predicitve, or reactive.
- Preventive maintenance
- This strategy is set if the object or its functional location has active maintenance rounds, or maintenance sequence with line type 'Time'.
- Predictive maintenance
- This strategy is set if the object or its functional location has active maintenance sequence with line type 'Counter', and Interval Type with the exception of:
- Once reached above
- Once reached below
- Repeated on aggregated value (Counter only)
- Once on aggregated value (Counter only)
- This strategy is set if the object or its functional location has active maintenance sequence with line type 'Counter', and Interval Type with the exception of:
- Reactive maintenance
- This strategy is set if the object or its functional location has active maintenance sequence with line type 'Counter' and Interval Type:
- Once reached above
- Once reached below
- Repeated on aggregated value (Counter only)
- Once on aggregated value (Counter only)
- This strategy is set if the object or its functional location has active maintenance sequence with line type 'Counter' and Interval Type:
Example of calculation in the Maintenace strategy overview.