Work on a Work Order

Complete a Work order job/line and create related registrations on the Mobile Client

Introduction

Fill out Work Orders and related Checklists. Create consumption registration. Add fault or downtime/production stop registrations. Create purchase requisitions for spare parts. Create requests and sign-off reports.

Prerequisites

Work Orders are available.

Audience
Maintenance Manager, Technician

View Work Scheduled to Me

A work order contains one or more work order jobs/lines. Each work order line is a job or task to be completed. The words 'work order job/line' and 'job/line' are used to describe the same thing, which is the job/line or task that must be completed.

On all work order lists, there is a Jobs/Lines toggle button. You can use this button to switch between showing work order jobs/lines or work orders in the list. The toggle button is automatically activated (yellow button) when you open a work order list, meaning you see a list of work order jobs/lines (= the tasks you're scheduled to work on). Select the toggle button (changes to white button) if you want to see a list of work orders.

  1. To view the work scheduled to you, go to the Work order lists screen and select the list Work scheduled to me.
  2. On the Work scheduled to me list, select the job/line you're going to work on. In the figure below, you see an example of a work order job/line.

View Number of Registrations and Forecasts on a Job/Line

In the details section at the bottom of the Work order job/line screen, you may see numbers next to some or all details pages, for example 1 or 2. This is for your information to show you there is, for example, 1 fault registration related to the job/line. Regarding consumption registrations (Items, Hours, Expenses), the number is shown as for instance 2/1. The first number shows the number of hours or items registered, the second number shows the number of forecasted hours or items related to the job/line. Regarding checklists, a number may show 1/3 where the first number represents the number of checklists completed and the second number is the number of total checklist lines.

Example:

  • If you see '0/2' on an Hours details line, it means there are 0 hours registrated but 2 hours forecasted on the job/line.
  • If you see '1/3' on a Checks details line, it means there are 1 checklist completed out of a total of 3 checklist lines.

Note

Depending on the way your company wants to work with work orders and work order jobs/lines, you might not be able to make registrations on all the work order details described in this section.

Customize fields

It's possible to show extra information on work orders and control which users/groups are able to view it as well as adding custom fields. Learn more in this article.

Example of the Work order job/line screen with registrations.
Example of the Work order job/line screen with registrations.

Notes

Select Show notes to read the notes related to the job/line.

You can add or edit notes in the three fields available, if required.

Notes are saved automatically as you write them. Select Close notes to close the section.

Add Timestamps to job/line notes

When adding notes, you can add a timestamp with the date, time, and name included before the new note.

Enable the functionality by going to Setup > Module configuration > Work execution > Work orders > Maintenance job note timestamp/Work order line timestamp. The option will then be enabled for any job/line note that is visible and not read-only.

  1. When the module configuration has been enabled, a new new button + Add with timestamp is attached to each job/line note field as seen in screenshot 01.
  2. Clicking the button opens a dialog where you can input the note (see screenshot 02).
  3. Click Save to save your note.
  4. Your note is now visible with the timestamp placed just above it. See screenshot 03.

New notes are sorted at the top of the notes field and you can scroll down to see older notes.

01. Add note with timestamp.
01. Add note with timestamp.
02: Enter a note and click 'Save'.
02: Enter a note and click 'Save'.
03: Example of note 'Adding a new comment' with a timestamp placed above it.
03: Example of note 'Adding a new comment' with a timestamp placed above it.

Checklists

Select Checks to view the checklist for the job/line. Sometimes you will see checklist headers that have checklist lines inside them, which you can see an example of in screenshot 01 below. To the right of the checklist header, you can see a number such as '1/2' which means that a total of two checklist lines exist and one has been completed. Below the title of the checklist header, you can see the status of the checklist such as 'Done' or 'In progress'.

  1. Complete the checklist lines one by one, in sequential order. You may see different types of checklists, as shown in screenshot 02 below.
  2. An instruction or message may be shown. Perform the task that is described.
  3. You may need to enter data in the form of a reading or a measurement, for example, kilometers, hours in use, or a temperature.
  4. You may need to select a variable from a list, which corresponds with your observation.
  5. If you see an asterisk (*) next to a checklist line, it means the check is mandatory, and you must fill out the line to register the checklist line as completed.
  6. On a checklist line, you can see symbols to the right. These symbols represent 'instructions', 'notes', and 'attachements'. Next to each symbol you can see a blue dot with a number inside. This number represents the number of either instructions, notes, or attachments there are to this specific checklist line. See screenshot 02 below.
  7. For every checklist line, select the check mark when the task is completed. Lines that require you to enter or select a value, or require a mandatory note will automatically be checked.
  8. When you have completed the checklist, select Save Checks.

01: Two checklist headers that each contain checklist lines.
01: Two checklist headers that each contain checklist lines.
02: Checklist lines.
02: Checklist lines.

Validate Checklist Lines before Completing Work

When changing the work status of a work order job/line to 'Completed', you can validate if all mandatory checklist lines on the given work order job/line have been completed. If a mandatory checklist has not been completed, a notification message will show on the screen.

You can set up the validation for checklist lines by going to: Setup > Module configuration > Work execution > Work orders > Work status > Work order schedule work status validate checklist lines.

View All Checklist Lines

Get an overview of all checklist lines for all jobs/lines on a work order.

On a work order, you can view all checklist lines on work order jobs/lines that are part of a work order.

  1. Select a work order, scroll to the details page and select Checklist overview.
  2. A list opens showing all work order jobs/lines within the work order.
  3. From the job lines, you can expand to view checklist lines.
  4. From the 'Show' tab, you can filter to see either all, completed, or uncompleted checklists that are included in the work order.

Example of a work order's Checklists overview.
Example of a work order's Checklists overview.

Faults

Fault registrations can be added and modified on requests and work order jobs/lines. On an asset/object you can only see the list of faults, not update it, as that should be done in relation to a specific request or work order.

Fault Registration

Select Faults to see the fault registrations registered on the job/line. You can also create fault registrations.

If a fault registration exists, follow steps 5-7 below.

  1. Select the 'context menu' button to add a new fault registration.
  2. Select the Date for the fault registration.
  3. Select Fault symptom to open a dialog where you can filter and select a symptom. Use the scroll function or filter a symptom at the top by name or ID.
  4. Select Fault area and Fault type in the lists.
  5. If you're troubleshooting and completing the fault registration, select Add cause and select a reason for the fault in the list.
  6. Select Add remedy and select a solution for the fault registration in the list.
    • If you want to change your selection for cause and remedy, select the trash can icon on the line to delete a registration. If required, you can add several causes and remedies to a fault registration.
  7. Select Save to complete the fault registration.
  8. Select the 'Return' button to return to the Work order job/line screen.

Creating a fault registration.
Creating a fault registration.
Select a symptom from the list or filter symptoms at the top by name or ID.
Select a symptom from the list or filter symptoms at the top by name or ID.
Editing a fault.
Editing a fault.

Downtime/Production Stop

Downtime/Production Stop Registration

Select Downtime activities/Production stops to see the downtime activity/production stop registrations on a job/line. You can also create a downtime activity/production stop.

  1. On the Downtime activities/Production stops screen, you can see all registrations.
    1. At the top, you can filter what you want to see by clicking Show and then select to either show all, open, or closed.
    2. Open registrations don't have an end date. Closed registrations have a start date and an end date.
  2. If a downtime activity/production stop registration exists, you can select it and edit Reason code, Start, and End as you require.

Make a new registration

  1. Select the + button to add a new registration.
  2. On the Create downtime activity/production stops screen, select a downtime activity/production stop reason code in the Reason code field. This field is optional to fill out and can be added after the registration.
  3. Select Start and select start date and time. This field is mandatory to fill out.
  4. If you know how long the downtime activity/production stop lasted, select End and select end date and time. This field is optional to fill out and can be added after the registration.
  5. Select Save to complete the registration.

Purchase Requisitions

Select Purchase requisitions to see the purchase requisitions created for the selected job/line. You can create purchase requisitons for items required on the work order job/line, which are not currently in stock.

Setup

Before workers can create purchase requisitions on the Mobile Client, you must complete procurement setup in D365FO. Refer to Microsoft documentation for information on how to set up and work with procurement catalogs:

The extent of procurement catalog setup required depends on how you use D365FO procurement functionality in your company.

Submitting a purchase requisition

When you save a purchase requisition, it is automatically submitted to D365FO > Procurement and sourcing module for further processing. The purchase requisition is related to the same Project ID as the work order. You can't edit or delete a purchase requisition on the Mobile Client after you have saved it, you can only view it.

Skip workflow submission

It's possible to skip the workflow submission of purchase requisitions, which means that created purchase requisitions are not submitted to the purchase requisition review workflow and their status becomes 'Draft' (not 'In review') in D365.

To enable this functionality, check the parameter Skip workflow submission in Setup > Mobile parameters > General > Procurement.

Add items to purchase requisitions

On the Mobile Client, you can add items to a purchase requisition in two ways:

Add category is used when you don't have the specific item number for the item, or when the item is not part of the regular stock in your company. In this case, you may find the item in an item catalog and add a specific reference or a general description of the item. The description should be precise enough for a procurement officer to create a purchase order for the item.

Add item is used when you know the item number, or you are able to find the item number when you search for the item.

Fill out description automatically

The description of a purchase requisition can be filled out automatically by using a combination of properties that are copied from the work order or work order job/line. The available properties are: description, workOrderId, jobTypeId, jobTypeVariantId, jobTypeName, and jobTypeVariantName.

  • Select the properties you want to be added automatically in Setup > Module configuration > Work execution > Work orders > Purchase requisition description fields.

Refer to the two test cases below for step-by-step procedures on how to create a purchase requisition by adding category or item.

Create a Purchase Requisition - Add Category

Data Requirements

  1. The user has access to Purchase requisitions on the Mobile Client.
  2. User setup is done in Setup > Module configuration > Work execution> Work orders >Purchase requisition.

Steps 12 expand

Expected

The user can create a purchase requisition by adding a category.

When the purchase requisition is saved, it is automatically submitted to D365FO > Procurement and sourcing module.

When a purchase requistion is saved and submitted, you can't edit it on the Mobile Client, you can only view it.

Create a Purchase Requisition - Add Item

Data Requirements

  1. The user has access to Purchase requisitions on the Mobile Client.
  2. User setup is done in Setup > Module configuration > Work execution > Work orders >Purchase requisition.

Steps 13 expand

Expected

The user can create a purchase requisition by selecting an item.

When the purchase requisition is saved, it is automatically submitted to D365FO > Procurement and sourcing module.

When a purchase requistion is saved and submitted, you can't edit it on the Mobile Client, you can only view it.

Items

Create Item Registrations

Select Items to create item registrations.

Make a Registration Based on a Forecast

  1. If an item forecast exists, select it, and select Save to create an item registration based on the forecast. If required, you can update the Quantity if you've used more items than forecasted.
    • You can also select spare parts or BOM items related to the asset/object to create an item registration.
  2. Select the Date of the item registration.
  3. Select Save to create the item registration.

Create a New Item Registration

  1. Create a new item registration by selecting the 'context menu' button and Add item registration on the Items screen.
    1. It's possible to search in the Offline Inventory stock. View the article below to see how.
    2. You can search for the item ID of the spare part or item by entering a search string in the search field or by scanning a QR code or barcode. If you want to search by scanning a QR code or barcode, select the icon in the top right (view further documentation here).
    3. When searching for items, the available spare parts and BOM are also searched. You can search by:
      • Item ID
      • Item name
    4. If you want to enter a search string, and you don't know the exact item ID, you can enter, for example, 20*, to see a list of all item IDs that start with the number 20. If items have related product images, they are also shown in the search results.
    5. When you find the item, you want to create a registration for, select it.
    6. On the Add item screen, enter the Quantity you want to register.
    7. Select the Date for the item registration and select Save.
  2. You may also be able to create new item forecasts. On the Items screen, select the 'context menu' button and Add item forecast.
    1. Search for the item by entering a search string or scanning a QR code, as described in step d. above.
    2. Select Category, Line property, Site, and Warehouse. See the article below on how to fill in warehouse dimensions automatically.
    3. Enter the forecast quantity in the Quantity field.
    4. Select Save.

Search in Offline Inventory

You can search for items offine in your offline inventory using the My Inventory switch in the upper right corner. The functionality works regardless of network connection.

Enable the functionality by going to Setup > Module configuration > Work execution > Work orders > Item offline inventory.

Fill in storage dimensions automatically

It's possible for the storage dimensions: site, warehouse, and location to be filled in automatically when creating a new item registration.

Site and Warehouse

It's possible for the site and warehouse dimensions to be filled in automatically based on a worker's default site and warehouse. This can be enabled by turning on the module configuration Work execution > Work orders > Registrations > Worker default site and warehouse. In case the worker doesn't have a default site and warehouse, the values from the work order job are used.

It's possible to enable a module configuration that only allows for the dimension inputs to be defaulted to those from the work order job. These dimensions are shown as read-only. In this case, the site and warehouse of the worker are not used. To enable this module configuration, go to Work execution > Work orders > Registrations > Item registrations lock storage dimension.

Location

If the warehouse has a default location, it's possible to have the location dimension filled in automatically. In order to use the functionality, you need to enable the entity 'InventItemLocation' in Setup > Entity setup.

In D365, the default location is defined for each individual item.

In order to find the default location for an item, go to Product information management > Products > Released products, find the relevant item and then select Manage inventory > Warehouse > Warehouse items. Each warehouse configuration can then have a default location as you can see in the screenshot below.

Default location.
Default location.

Show if Active Purchase Price Trade Agreements Exist

If items on an asset/object BOM or spare parts list have an active purchase price trade agreement, you can see it on the item card. This makes it easy to choose the items that your company has an active purchase price trade agreement with. See the screenshots below for reference.

  1. To see active purchase price trade agreements, enable the parameter in Setup > Mobile Parameters > General > Purchase trade agreement.
  2. Then initialize the data by running an entity initialization in Periodic > Entity initialization (or through a batch job).

Note: in case that the purchase agreement changes, it will not be reflected on the items until the next 'Entity initialization' has been run.

Items with active agreements shown on a work order job/line.
Items with active agreements shown on a work order job/line.
Items with active agreements shown when searching for items.
Items with active agreements shown when searching for items.

Work Hours

Create Work Hour Registrations

Select Hours on the work order job/line or work order job/line details to create work hour registrations.

You can create work order hour registrations in four ways. You can register the number of hours spent, or you can register the time the work order starts and when it ends (From and to times). You can also register hours based on a forecast, or register hours using the timer.

Register hours

  1. You can create a new work hour registration by selecting the 'context menu' button on the Hours screen.
  2. Fill out the fields as you require.
  3. In the Worker section, you can register the hours for yourself. If you're allowed to register for other workers, click the field and select the relevant worker.
  4. Select Save registration to create the work hour registration.

Register hours using From and To time

With From and To time, you can specify both date and time. Add From and To time by going to Setup > Module configuration > Work execution > Work orders > Registrations > Hour registrations from and to time, and set up users.

  1. You can select From and To time on the Add time screen. If you need to register midnight - in the 'from' field, you can register 12:00 AM to signify midnight between yesterday and today and in the 'to' field, you can register 12:00 AM to signify midnight between today and tomorrow.
    • Example: If you want to register from midnight between the 29th and 30th of January, you need to select 12:00 AM on the 30th of January. If you want to regsiter to midnight between the 30th and 31st of January, you need to select 12:00 AM on the 31st of January. This example of a time registration equals 24 hours.
  2. In the Worker section, you can register the hours for yourself. If you're allowed to register for other workers, click the field and select the relevant worker.
  3. Select Save registration to create the work hour registration.

Create a registration based on a forecast

  1. If a work hour forecast exists, select it to create a registration based on the forecast.
  2. Edit the forecast as required.
  3. Select Save registration to create the work hour registration.

Register hours using the timer

You can register hours by using the 'Start timer' function on a work order job/line. You can start the timer when you start working and stop it when you've finished working. The time registration date and time fields will be filled out automatically, and you only need to save it. This functionality works both when From and To time is activated or deactivated.

To enable the functionality, go to Setup > Module configuration > Work execution > Work orders > Registrations > Maintenance jobs start/stop / Work order lines start/stop.

  1. When you're ready to start working on a work order job/lines, go to the 'context menu' menu in the top right corner and select Start timer. The timer is now running.
  2. When you've finished your work, select Stop timer.
  3. A dialog is now shown with the starting and ending date and time automatically filled out based on the values from the timer.
  4. Add more information in the dialog if needed. Otherwise, select Save registration to create the work hour registration.

Lock default project category

It's possible to lock a default project category for a worker if the worker already has a default project category. This disables the worker from editing the category when making an hour registration and the 'Category' field is shown as a read-only field.

To enable the feature, go to Setup > Module configuration > Work execution > Work orders > Registrations > Modify project category and set up the relevant users or user groups.

Example of an hour registration using 'from and to time'.
Example of an hour registration using 'from and to time'.

Create, Edit and Delete Hour Forecasts

On a work order job/line, you can create, update and delete hour forecasts.

Setup

Enable the functionality by going to Setup > Module configuration > Work execution > Work orders > Hour forecast modification and add relevant users.

Add, edit or delete an hour forecast

After enabling the functionality, you will now see a button + Add hour forecast (seen in screenshot 01). When clicking this button, you will see a dialog for creating an hour forecast. You only need to fill in the number of hours and the project category for the forecast, before clicking Save hour forecast. You can see the dialog in screenshot 01 below.

In order to edit or delete an existing forecast, select the context menu to the right of the forecast and select either Edit forecast or Delete forecast. See screenshot 02 for reference.

01: Adding an hour forecast.
01: Adding an hour forecast.
02: Editing or deleting an hour forecast using the context menu to the right of the forecast.
02: Editing or deleting an hour forecast using the context menu to the right of the forecast.

Attachment

Select Attachments

Select Attachments to see the attachments and asset/object documents on the job/line. Examples are work instructions or safety instructions that you must read before starting the job/line.

Select an attachment in the list to download and read it. When you're done, select the 'Return' button until you return to the Work order job/line screen.

Attachments may also be set up on the asset/object that the work order is created for.

  1. On the Work order job/line screen, select Asset/Object to open the asset/object details screen.
  2. On the asset/object details screen, select Attachments to see if there are attachments or asset/object documents that you must read before you start working on the job/line.
  3. Select an attachment to download and read it.
  4. When you're done, select the 'Return' button until you return to the Work order job/line screen.

Update attachment notes

You can update notes on attachments.

To use the functionality, enable the module configuration in General > Document attachments > Modify note.

  1. To the right of the attachment, click the context menu and then select Update Note.

Note:

  • This functionality is valid for attachment types that have been set up as modifiable on the document type.
  • The parent entity must be active.

Expense Registrations

  1. If an expense forecast exists, select it to create a registration based on the forecast. If required, you can update the registration.
  2. Select Save to create the expense registration.
  3. If required, you can also create a new expense registration by selecting the 'context menu' button on the Expense screen.
  4. Fill out the fields as you require.
  5. Select Save to create the expense registration.

Update Work Status

Work status is registered on the work order job/line. Work status is shown in the upper-right corner on the job/line details screen, for example, 'Not started'. Available work status types:

  • Not started
  • In progress
  • Waiting
  • Cancelled
  • Work completed.
  1. Select the current work status to open the Change work status pop-up.
  2. Select 'In progress' when you start working on a job/line.
  3. Then select OK.

State/Stage is the work order lifecycle state/work order stage and is registered on the work order either manually or automatically. When updating the work order manually, it should not be updated to a finished or ended state until all work order jobs/lines on the work order have been completed. Like work status on a work order job/line, State/Stage is shown in the upper-right corner on the work order, and you can change the State/Stage by selecting it to open the Change state pop-up.

Mapping a status to a state/stage

A work order status can be mapped to a state/stage (view the documentation here to set it up). If you map a status to a state/stage, the state/stage is updated automatically and you will see a message on the screen when you update the work status, informing you that the work order lifecycle state/work order stage is also updated. If required, you can cancel the update of the state/stage, but not the work status, by selecting Cancel on that message.

Changing the work status from the job/lines details screen.
Changing the work status from the job/lines details screen.

Type in Start and End Date when Changing State/Stage

As a worker, you can set the actual start and end date on a work order when changing the lifecycle state/work order stage. In this way, you don't have to change it at the exact time you start or stop the work.

Enable the functionality by going to:

  1. Asset management > Setup > Work order > Lifecycle states/Work order stage.
  2. In the 'General' tab, go to the the state/stage you use when a work order is in progress and set the 'Set actual start' button to Yes.
  3. In the 'General' tab, go to the state/stage you use when a work order is completed and set the 'Set actual end' button to Yes.
  4. You are now required to update the start and end time/date when changing the state/stage on a work order.

If you set the Remark mandatory to Yes, you will also have to fill out a remark when changing the state.

Work Order State/Stage Log

You can view log entries about the states/stages a work order has gone through, which is visible from the details page of a work order. The state/stage log is shown as a timeline with the newest logs from the top. On each state/stage log, you can view:

  • The state/stage a work order was updated to.
  • The date and time it was updated.
  • Who updated it.
  • Remark (if available).
  • Reason code (if available).

Setup

To make the log entries visible on the work order details page, go to Setup > Entity setup and enable the entity 'StageLogWorkOrder'. Then run the 'Entity initialization' to make sure the entity is initalized properly.

Choosing
Choosing "State/Stage log" from the work order details page.
Example of a work order's state/stage log.
Example of a work order's state/stage log.

Responsible Worker

In the header section of a work order or work order job/line, you see a Responsible worker field. The worker shown in that field is usually not the worker scheduled to do the job/line. For example, responsible worker could be a supervisor or manager responsible for the work being done and ensuring that the work adheres to specific quality standards.

Depending on the mobile setup, you may be able to edit the Responsible worker field. If you see a pencil icon next to the field, you can edit it as long as the work order is active.

You can edit Responsible worker on a work order or work order job/line. If you make an update in the field, the work order is updated accordingly.

Refer to the test case below for a step-by-step procedure on how to edit Responsible worker on a work order or work order job/line.

Responsible worker on a work order job/line.
Responsible worker on a work order job/line.

Edit Responsible Worker

Data Requirements

  1. At least one active work order exists.
  2. The mobile configuration setup allows the user to edit responsible worker.

Steps 6

  1. On the Mobile Client, select Work orders, and select a list.

  2. Select a work order or work order job/line in the list.

  3. On the work order/work order job/line header, select the pencil icon next to the Responsible worker field.

  4. Optional: You can enter a filter in the filter options field to limit the names you want to see.

    Example: Enter 'p' in the field. Search results show workers with 'p' as part of the name.

  5. Select a name.

  6. Select Save.

Expected

The user can edit the Responsible worker field on a work order or work order job/line.

A message is shown on the Mobile client, informing the user that responsible worker was updated.

Set Responsible Workers Based on Primary Functional Location

You can limit the list of available workers to set as responsible worker on a work order to those whose primary functional location is the same as the functional location of the asset/object on the work order.

  • Enable the functionality by going to Setup > Module configuration > Work execution > Work orders > Responsible worker from asset/object location only, and select a user or user group.
  • If you haven't already specified workers to primary functional locations, it can be done from Asset management/Enterprise asset management > Setup > Workers > Workers > Select a worker > Functional locations (tab) > Primary (column).

Once the module configuration is enabled and the primary locations are set, the list of available responsible workers on work orders and work order jobs/lines will be limited based on the workers' primary functional location and the functional location of assets/objects.

Note, this functionality limits available employees when 'Work order responsible worker outside group' module configuration is on as well.

View and Edit Work Order Pools

You can view and edit work order pools related to a work order on the details page of the work order.

Pools are always visible, but to be able to edit them it requires a setup step.

  1. Go to Setup > Module configuration > Work execution > Work orders > Work order pool relation modification.
  2. Set the value to true for a user or user group.
  3. Now, you'll see a pencil icon to the right on the work order pools field shown on the details page. The pencil icon signifies that this detail can be edited.

Edit Work Order Pools

  1. On the details page of a work order, click on the work order pools field to edit.
  2. A window opens with a list of available pools. Use the checkboxes to define whether a work order should be part of the listed work order pools. If it's already part of a pool, that pool is pre-selected.
  3. Click 'Apply' to save your changes.

View and edit work order pools on the details page.
View and edit work order pools on the details page.
Select or deselect pools for a work order.
Select or deselect pools for a work order.

Requests

Create a Request from a Job/Line

It's possible to create a request directly from a work order job/line.

If you're using requests, you have access to the button Create a request by selecting the three dots menu. See the screenshot below. From here, the 'Create request' dialog opens with the asset/object filled in, which is taken from the work order job/line.

Note: you can use requests by enabling it in Setup > Module configuration > Work execution > Maintenance requests > Enabled.

The 'Create request' button available from the three dots menu.
The 'Create request' button available from the three dots menu.

If a work order was created from a request, you can find the following request information in the associated work order job/line headers:

  • Request - link to the request.
  • Started by - shows the name of the maintenance worker who created the request. If the request was created by an employee who is not set up as a maintenance worker in Asset management/Enterprise asset management, this field is not shown.

Create a Sign-off Report

When you've completed all the jobs/line on a work order, a maintenance worker and a manager or supervisor can sign off a report to verify completion of the jobs/lines related to the work order. The Sign-off report can contain various information about the work order depending on your needs.

Setup

  1. In order to have the sign-off report be available, the module configuration Work execution > Sign-off report > Enabled must be set to 'true' for the user.
  2. The contents of the sign-off report can be configured, depending the type of information you want to include in the report. This can be configured in Setup > Module configuration > Work execution > Sign-off report. See screenshot 01 below to see the possible configurations.
  3. The Customer signature and Worker signature are mandatory input fields - if you enable them, the user must fill them in before the sign-off report can be saved.
  4. It's possible to write some terms and conditions that will be added to the sign-off report. This can be done in Setup > Mobile parameters > General > Sign-off report.
    1. Whether they are shown depends on the lifecycle state/stage the work order is in when the sign-off report is created. This can be set on the lifecycle state/stage in D365 as seen in screenshot 02 below.
  5. In order to have the sign-off report be saved correctly, a specific document type must be added to Setup > Document types: Entity setup = WorkOrder, Type = SignOffReport, Document type identifier = SignOffReport, Permission = (Either: Create, Update, or Delete).

Create a sign-off report

  1. On the Work order details screen, select 'context menu' in the top right and then Sign-off report.
    1. Note that if the work order is not active, the user will be informed that the sign-off report can't be created for an inactive work order.
    2. Note that if the work order has non-processed mandatory checklist lines, i.e. not checked or set as N/A, the user is informed that some checks are not filled in, and they are also presented with a link to open the checklist.
  2. On the Sign-off report screen, you can see the report. The report is automatically filled out. View an example of a sign-off report in screenshot 04.
  3. If the worker and/or customer signature are enabled for the sign-off report, these must be filled in. Each of the fields Service technician signature and Customer signature is an input field where the name can be typed and a canvas where a signature can be drawn with the finger or mouse. See the input fields at the bottom of the report in screenshot 03.
  4. Select the Signature required button in the 'Service technician signature' field where the maintenance worker or service technician enters a name in the Printed name field and provides a signature in the large signature field.
  5. Select Apply to save the changes.
  6. Select the Signature required button in the 'Customer signature' field. The manager or supervisor enters a name in the Printed name field and provides a signature in the large signature field.
  7. Select Apply to save the changes.
  8. When the sign-off report has been approved and signed, it can be saved. It's saved as a PDF and added as an attachment to the work order. View an example of a sign-off report in screenshot 04.

01: Configuration of content shown on the sign-off report.
01: Configuration of content shown on the sign-off report.
02: 02: Specify if terms and conditions should be shown on the sign-off report on a lifecycle state/stage.
02: 02: Specify if terms and conditions should be shown on the sign-off report on a lifecycle state/stage.
03: Signature required input field.
03: Signature required input field.
04: Example of a sign-off report.
04: Example of a sign-off report.

Replace an Asset/Object

You can easily replace an asset/object on the work order job/details page.

Setup

In order for the functionality to be available, go to Setup > Module configuration > Work execution > Work orders > Maintenance jobs replace asset/Work order lines replace object and enable the functionality for relevant users.

Replace an asset/object

  1. On the work order job/line details page, select the context menu in the top right and select Replace asset/object.
  2. Select a functional location where the existing asset/object (the asset/object on the job/line) should be stored.
  3. Select an asset/object to replace the old one with.

After synchronization, you're able to see the changes in D365.

Replace an Asset/Object from a Checklist

You can replace an asset/object directly from a checklist line using the measurement type 'replacement measurement'. This is useful in the case when you want to replace an asset/object with a counter to a new asset/object with a counter.

Setup

  1. Enable the functionality by going to Setup > Module configuration > Work execution > Work orders > Maintenance jobs replace asset/Work order lines replace object.
  2. The module configuration must be enabled for checklists with the type 'Replacement measurement' to be usable.

Replace asset/object

The measurement type 'Replacement measurement' is presented similarly to how 'Measurement' checklist lines are presented.

Before changing the asset/object, you need to fill in the measurement for the asset/object you are replacing. Then from a button on the checklist line, you can directly replace the asset/object and then enter the measurement of the counter from the new asset/object.

In case the checklist contains both 'Measurement' and 'Replacement measurement' lines, both types of lines will indicate which asset/object they are for.

In the scenario where you are not allowed to replace assets/objects but the checklist has the 'Replacement measurement' checklist lines, you are informed that an asset/object should be replaced for the measurement to have an effect.

Print Report

Print a Work Order Report

Set up printers and reports in D365 to be able to print out reports on Work orders directly from the mobile client.

You can set up users to have default printers and default reports, and you can set up a report to a default printer.

Setup

The setup consists of two parts: Printer settings and Mobile report configuration.

  1. Go to Setup > Printer settings to set up and assign a default printer. Click New to create a new printer configuration, enter a description, and assign a printer destination to specify where the report is printed.
  2. Go to Setup > Mobile report configuration to specify which report type, report name, and report design you want to use. Click Configure report in the top toolbar to finish the setup.

Set up User to a Default Printer

To set up a user to a default printer, go to Setup > Module configuration > General > Printing > Default printer configuration, make a new line and specify a user in the Scope and Mobile user menu and choose a printer in the Parameter value menu.

Set up a Default Report

Go to Setup > Module configuration > Work execution > Work Orders > Report default configuration to set up a default report. Add line and specify the report as default in the Scope menu and choose a report from the Parameter value menu. You can also assign the report to a user or a user group using the Scope menu.

If you set up both a user and a report to have a default printer, the default printer on the report takes precedence.

Copyright Dynaway A/S

Privacy Policy